Ferro Silicon 75-Ferro silicon-yrzmetal.com/

Ferro Silicon 75

We are industry’s leading manufacture and producer of Ferro Silicon. It is seen that stainless sector is one of the fastest growing categories in the steel industry and thus Ferro Silicon comes into the picture. Stainless steel requires Ferro Silico compared to regular carbon steel.

Ferro silicon 75 is an indispensable deoxidizer in the steelmaking industry. In steelmaking, ferro silicon 75 is used for precipitation deoxidation and diffusion deoxidation.

Ferro silicon 75 used as an inoculant and spheroidizing agent in the cast iron industry. In the production of nodular cast iron, 75 ferro silicon is an important inoculant (helping to precipitate graphite) and nodulizer

Application:

The raw material of ferrosilicon 75 is an iron alloy material made by smelting silica and coke.
Ferrosilicon 75 has always had a good use effect in the steelmaking industry, and ferrosilicon is also one of the traditional steelmaking materials.
Ferrosilicon 75 can effectively deoxidize in steelmaking, so ferrosilicon 75 can be used as a deoxidizer for steelmaking;

Chat Online Leave Message

Related cases

Introduction
Specification
Related products
Contact

Introduction

In ferrosilicon 75, there is about 75% silicon, which has a good affinity with oxygen in molten steel. When ferrosilicon 75 is added during steelmaking, the affinity between silicon and oxygen in ferrosilicon 75 can effectively discharge oxygen from molten steel and completely replace the use of deoxidizers;

Ferrosilicon 75 has a good affinity in the process of deoxidation, and the reaction of deoxidized molten steel is relatively small, ensuring personnel safety. At the same time, compared to deoxidizers, ferrosilicon 75 has a shorter deoxidation time, which reduces the time spent in steelmaking. Not only is ferrosilicon 75 more convenient in terms of price compared to deoxidizers, which can save the cost spent by manufacturers in steelmaking and improve their efficiency;

The silicon dioxide produced by the reaction of 75% ferrosilicon with molten steel will float on the surface of the molten steel for easy removal.

Specification

Ferro Silicon Specs as follows:

Model	Si	C	Al	P	S
FerroSilicon 75	75%Min	0.2%Max	2.0%Max	0.04%max	0.02%max
FerroSilicon 74	74%Min	0.2%Max	2.0%Max	0.04%max	0.02%max
Low Al FeSi 75	74%min	0.2%max	0.5%Max	0.04%max	0.02%max
Low Al FeSi 75	74%min	0.2%max	0.06%Max	0.04%max	0.02%max
FerroSilicon 72	72%Min	0.2%Max	0.3%Max	0.04%max	0.02%max
FerroSilicon 65	62%Min	0.2%Max	0.2% Max	0.04%max	0.02%max
FerroSilicon 45	45%Min	0.2%Max	0.9% Max	0.04%max	0.02%max